单项选择题
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 isalso not able to reach the WebServer. R1 also does not have any active BGP neighbor.
Cisco 642-832： Practice Exam
Configon R1
router bgp 65001
no synchronization
bgp log-neighbor-changes
network 209.65.200.224 mask 255.255.255.252
neighbor 209.65.200.226 remote-as 65002
no auto-summary!
access-list 30 permit host 209.65.200.241
access-list 30 deny 10.1.0.0 0.0.255.255
access-list 30 deny 10.2.0.0 0.0.255.255!
interface Serial0/0/0/1
ip address 209.65.200.224 255.255.255.252
ip nat outside
ip access-group 30 in
What is the solution of the fault condition？（）
A.Add permit statement for 209.65.200.224/30 network in access list 30
B.Remove Deny Statements from access-list 30
C.Change neighbor 209.65.200.226 remote-as 65002 statement to neighbor 209.65.200.226 remote-as 65001
D.Use extended access-list instead of standard access-lis
相关考题
-
单项选择题
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 isalso not able to reach the WebServer. R1 also does not have any active BGP neighbor. Cisco 642-832： Practice Exam Configon R1 router bgp 65001 no synchronization bgp log-neighbor-changes network 209.65.200.224 mask 255.255.255.252 neighbor 209.65.200.226 remote-as 65002 no auto-summary! access-list 30 permit host 209.65.200.241 access-list 30 deny 10.1.0.0 0.0.255.255 access-list 30 deny 10.2.0.0 0.0.255.255! interface Serial0/0/0/1 ip address 209.65.200.224 255.255.255.252 ip nat outside ip access-group 30 in The Fault Condition is related to which technology？（）
A.IP Access
B.IP NAT
C.BGP
D.IP Access List -
单项选择题
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 isalso not able to reach the WebServer. R1 also does not have any active BGP neighbor. Cisco 642-832： Practice Exam Configon R1 router bgp 65001 no synchronization bgp log-neighbor-changes network 209.65.200.224 mask 255.255.255.252 neighbor 209.65.200.226 remote-as 65002 no auto-summary! access-list 30 permit host 209.65.200.241 access-list 30 deny 10.1.0.0 0.0.255.255 access-list 30 deny 10.2.0.0 0.0.255.255! interface Serial0/0/0/1 ip address 209.65.200.224 255.255.255.252 ip nat outside ip access-group 30 in On which device is the fault condition located？（）
A.R1
B.DSW1
C.R4
D.R2 -
单项选择题
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 and Client 2 are not able to reach the WebServer at 209.65.200.241. Initial troubleshooting showsthat DSW1， DSW2 and all the routers are able to reach the WebServer Cisco 642-832： Practice Exam Configuration on R1 ip nat inside source list nat_pool interface Serial0/0/0/1 overload! ip access-list standard nat_poolpermit 10.1.0.0! interface Serial0/0/0/1 ip address 209.65.200.224 255.255.255.252 ip nat outside! interfaceSerial0/0/0/0.12 ip address 10.1.1.1 255.255.255.252 ip nat inside ip ospf message-digest-key 1 md5 TSHOOT ip ospd authentication message-digest What is the solution of the fault condition？（）
A.Add permit 10.2.0.0 statement in nat_pool access-list
B.Remove permit 10.1.0.0 statement from nat_pool access-list
C.Change ip nat inside source list nat_pool interface Serial0/0/0/1 overload to ip nat inside source listnat_pool interface Serial0/0/0/0.12 overload
D.Change ip nat outside statement under Serial0/0/0/1 configuration to ip nat inside
