单项选择题
Following ticket consists of a problem description and existing configuration on the device.
Figure 1
Figure 2
Trouble Ticket Statement
Client 1 is getting an IP address from the DHCP server but is not able to ping DSW1 or the FTP
Cisco 642-832： Practice ExamServer
Configurationon DSW1
vlan access-map test1 10drop
match ip address 10!
vlan filter test1 vlan-list 10!
ip access-list standard 10permit 10.2.0.0 0.0.255.255!
Interface VLAN10
ip address 10.2.1.1 255.255.255.0!
What is the solution of the fault condition？（）
A.Configurationure Static IP Address on Client 1
B.Change the IP Address of VLAN 10 on DSW1
C.Add Permit any statement to access-list 10
D.Remove VLAN filter test1 from DSW1
相关考题
-
单项选择题
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 is getting an IP address from the DHCP server but is not able to ping DSW1 or the FTP Cisco 642-832： Practice ExamServer Configurationon DSW1 vlan access-map test1 10drop match ip address 10! vlan filter test1 vlan-list 10! ip access-list standard 10permit 10.2.0.0 0.0.255.255! Interface VLAN10 ip address 10.2.1.1 255.255.255.0! The Fault Condition is related to which technology？（）
A.VLAN Access Map
B.InterVLAN communication
C.DHCP
D.IP Access List -
单项选择题
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 is getting an IP address from the DHCP server but is not able to ping DSW1 or the FTP Cisco 642-832： Practice Exam Server Configurationon DSW1 vlan access-map test1 10drop match ip address 10! vlan filter test1 vlan-list 10! ip access-list standard 10permit 10.2.0.0 0.0.255.255! Interface VLAN10 ip address 10.2.1.1 255.255.255.0! On which device is the fault condition located？（）
A.R4
B.DSW1
C.Client 1
D.FTP Server -
单项选择题
Following ticket consists of a problem description and existing configuration on the device. Figure 1 Figure 2 Trouble Ticket Statement Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 isalso not able to reach the WebServer. R1 also does not have any active BGP neighbor. Cisco 642-832： Practice Exam Configon R1 router bgp 65001 no synchronization bgp log-neighbor-changes network 209.65.200.224 mask 255.255.255.252 neighbor 209.65.200.226 remote-as 65002 no auto-summary! access-list 30 permit host 209.65.200.241 access-list 30 deny 10.1.0.0 0.0.255.255 access-list 30 deny 10.2.0.0 0.0.255.255! interface Serial0/0/0/1 ip address 209.65.200.224 255.255.255.252 ip nat outside ip access-group 30 in What is the solution of the fault condition？（）
A.Add permit statement for 209.65.200.224/30 network in access list 30
B.Remove Deny Statements from access-list 30
C.Change neighbor 209.65.200.226 remote-as 65002 statement to neighbor 209.65.200.226 remote-as 65001
D.Use extended access-list instead of standard access-lis
